Sustainable Urban and Community development Institute
To participate from China,
please contact IEREK's
chinese representative:
Rachel Meng
Tel: +86 (0) 1059105326
Email: chinaconf.event@gmail.com
Engineering science is a broad discipline that encompasses many different scientific principles and associated mathematics that underlie engineering.
It integrates engineering, biological, chemical, mathematical, and physical sciences with the arts, humanities, social sciences, and the professions to tackle the most demanding challenges and advance the well-being of global society.
Architecture engineering is branch of engineering which combines art, science & technology and application of engineering principles for the development of designing, planning, and construction.
Architecture is the constant innovation in designing for high-efficiency in the performance of buildings, in terms of planning, construction, and lighting, while maintaining and applying the art in its form.
Moreover, the field of architecture goes hand in hand with that of Technology.
Technology is the branch of knowledge that deals with the creation and use of technical means and their interrelation with life, society, and the environment, drawing upon such subjects as industrial arts, engineering, applied science, and pure science.
With the development of technology during the 20th century, many of its facilities, including architecture and engineering, have been influenced by architectural innovation.
This was through globalization and openness to the world in the West, which is creating huge architectural breakthroughs by many of the world's great architects who have resorted to the use of modern and advanced technology.
This technological development was not limited to construction materials but entered the world of computing and global communication.
This development moved from the human mind to the computerized mind, from the human hand to computerized systems and programs.
Nowadays, engineering technology has to cope with the rapid industrialization and urbanization seen in most countries.
Furthermore, creative design and construction practices are challenging tasks to the architects and engineers to meet the ever-growing demands of society. Therefore, IEREK provides this conference on "Architecture, Engineering, and Technology" that will cover a wide range of topics in architecture, engineering, and technology.
- Architecture education
- Architecture and human behaviour
- Eco Cities
- Design and Sustainability
- Theories of design and architecture
- Precedents in Architecture
- Architecture in Islamic world
- Urban design and development
- Infrastructure and urban development
- Impact of planning development of urban planning
- Smart innovations
- Environmental Engineering
- Ecology and Pollution
- Development of rural and desert regions
- Development of tourism areas
- Ecology and pollution
- Urban planning education
- Infrastructure and urban development
- Impact of planning development of urban planning
- Impact of privatization on urban planning
- Islamic cities
- Problems of large cities
- Problems of new towns
- Urban planning
- Water resources and urban development
- Smart and Secured Communications
- ICT Innovations
- Computer and Communication Security
- Advanced Knowledge Technology
- Mobile Communication and Computing Applications
- Large Database Architecture and Design
- Cloud and Grid Computing
- Nano-materials and Nanotechnology
- Solar Energy as electrical clean source
- Communication and IT Technology
- Networks
- Construction Management
- Geotechnical Engineering
- Highway Engineering
- Materials and quality control
- Reinforced concrete
- Steel Structure
- Surveying and Measurements
- Theory of Structure
- Construction management
- Concrete and Construction technology
- Hydraulic and water engineering
- Extractive metallurgy
- Geo-statistics
- Materials science
- Mine surveying
- Mineral processing
- Mining and environment
- Mining geology
- Mining technology
- Particulate material handling
- Physical metallurgy
- Nano-crystalline materials
- Amorphous and glassy materials
- Composite materials
- Thin films
- Metal hydrides, carbides and nitrides
- Mechanical alloying
- Reserve estimation
- Rock mechanics
- Corrosion
- Electrometallurgy and electroplating
- Welding
- Casting
- Advanced and new materials
- Ceramics
- Refractories
- Metallurgy of forming
- Powder metallurgy
- Failure
- Applied Geophysics
- Drilling
- Environmental Considerations
- Gas Engineering
- Petroleum Geology
- Processing and Petrochemicals
- Production
- Reservoirs
- Transportation
- Circuits and systems
- Digital signal processing
- Electrical communication
- Optic electronics
- Micro electronics
- Fields and waves
- Electrical machines
- High voltage engineering
- Power electronics and electric drivers
- Power generation and transmission
- Power systems (analysis and control)
- Renewable energy
- Switch gear and protection Engineering
- Artificial intelligence
- Software Engineering
- Computer networks
- Computer architecture
- Languages engineering
- Control engineering and robotics
- Computer vision
- Knowledge & networks security
- Embedded systems
- Systems engineering
- Bioinformatics
- CAD & manufacturing
- Adaptive solutions techniques
- AI based methods
- Applied mathematics
- Optimization methods
- Physical systems: modeling and simulation
- Soft computing techniques
- Dynamical systems and application
- Mathematical physics
- Control theory and optimization
- Nuclear spectroscopy
- Solid state physics and application
- Combustion and flame
- New and renewable energy
- Heat and mass transfer
- Air conditioning and refrigeration
- Aeronautics and aerodynamics
- Environmental pollution and control
- Automatic control
- Nuclear energy
- Manufacturing processes and systems
- Industrial engineering
- Engineering materials and powder metallurgy
- Machine design and mechanisms
- Stress analysis
- Biomedical engineering
- Computer aided design and computer aided manufacturing
- Dynamic and Vibrations
- Material Sciences and Production Technology
- Robotics, Auto and Controls
- Mechanical Design
- Power Engineering
- Quality Control and Quality Management
- Modern Manufacturing Methods
Cairo,Egypt
Title | Date |
---|---|
Abstract Submissions Deadline | 19 Sep 2020 |
Last Notification for Abstract Acceptance | 19 Oct 2020 |
Full Paper Submission Deadline | 18 Dec 2020 |
Last Notification for Full-Paper Acceptance | 17 Jan 2021 |
Early Payment Deadline | 18 Dec 2020 |
Regular Payment Deadline | 17 Jan 2021 |
Late Payment Deadline | 16 Feb 2021 |
Letter of Visa (for delegates who need visa entry) | 17 Jan 2021 |
Letter of Final Acceptance | 17 Jan 2021 |
Conference Program | 16 Feb 2021 |
Conference Launch | 18 Mar 2021 |
Instructions
- Each research paper should have one main author who should pay the full fee (Author fees) regardless of attendance.
- Each co-author (1-5 max) has his/her own separate fees to pay as shown in a table below.
- A research paper fee allows only one author, whether main or co-author, to attend the conference and receive only one copy of the conference proceedings book in both hard and soft copies. Extras can be requested for a fee shown below.
Loyalty Membership Discounts
The more you attend, the more you're rewarded!
IEREK offers its loyal participants with the following discounts depending on his/her attendance:
Attendance |
Second |
Third |
Fourth |
Fifth |
Discount |
5% |
10% |
15% |
20% |
*The aforementioned discounts are only applicable during Regular and Late Payment times. For more information, please refer to 'Important Dates'.
Fees for Audiences (Co-authors, Learners, and Interests) | USD 250 |
Fees for NON-Attending Co-Authors | USD 50 |
Author fees for Early Payment (Long Paper) | USD 400 |
Author fees for Regular Payment (Long Paper) | USD 500 |
Author fees for Late Payment (Long Paper) | USD 600 |
Author fees for Early Payment (Short Paper) | USD 250 |
Author fees for Regular Payment (Short Paper) | USD 300 |
Author fees for Late Payment (Short Paper) | USD 400 |
- For participants who need Entry Visas, IEREK will issue a visa letter for applicants who are accepted to present at our conferences.
- Please notice that we will endeavor to assist you in obtaining a visa but the responsibility is yours and the decision rests solely with the appropriate embassy.
Please note that we will endeavor to assist you in obtaining a visa if needed, by sending an invitation letter, but the responsibility is yours and the decision rests solely with the appropriate Embassy.
- Delegates in any event who cancel their registration due to special circumstances for any reason will receive refunds according to the following plan and according to the number of days from the start of the event:
Cancellation Policy | Up to 60 days before the event | Up to 50 days before the event | Up to 40 days before the event | 39 days before the event |
Penalty | 20% | 50% | 70% | 100% |
EXCEPTION
A refund is not possible if
- An acceptance letter has been issued (Authors only)
- The proceedings of the event have been published (Authors only)
- All matters have been finalized (accommodation/travel expenses paid for)
Visa Rejection Cases
Reason and proof of rejection must be submitted. If the reason of rejection is due to an error on our part, the participant will be refunded their full fee with a deduction of a 20% administration fee.
Documents to be issued by IEREK to acquire a visa are as follows:
* Final Acceptance Letter (Authors only)
* Visa Invitation Letter
* Invoice/proof of payment
We encourage all authors and attendees to ensure their having acquired all documents (those applicable) mentioned.
If the reason of rejection is not related to any of the aforementioned and is an error on the participant’s part, the following will apply:
* Authors: may choose to let their co-author present his/her research on his/her behalf free of charge. If the author does not have a co-author, a member of the scientific committee shall present on the author’s behalf.
* Audience members/Registrants: will only be allowed to attend another similar event of their choosing that is organized by IEREK free of charge.
- After you have received the acceptance of your abstract, please continue to write your full paper with the requested template (please download from the link provided below).
Note:
Final acceptance will be based on the full-length paper. For publication, the accepted papers must be presented at the conference.Writing Templates: Authors are strongly encouraged to use the formatting style described below for submitting an abstract as this format is required for the full paper.
- English will be the official language.
To download the writing template for a full-length paper,Click here
Abstract and full paper submission instructions,Click here
Elementary Review:
Once an abstract has been submitted to our website, it is assigned for review by the reviewers using the abstract review sheet and validation of publication. This is based on four criteria:
1· Accepted (with minor editing changes).
2· Conditionally accepted (with revisions provided to authors).
3· Rejected but encouraged for re-submission with major modifications.
4· Rejected as inappropriate or unworthy of presentation in this certain conference.
- The criteria for accepting abstracts for the conference are as follows; a relevant topic of the conference should be proposed with clear writing, aims, and objectives of the study clearly presented as well as a sound literature and methodology of work.
Acceptance for your paper:
After receiving an acceptance for your abstract and after the submission of your research (short paper version), the paper will enter a process for plagiarism check to ensure that the content is original.
After the conference, authors interested in publishing their manuscripts will be required to submit an extended version of their research papers (10-12 pages long) and they will be subject to a rigorous revision process as follows:
Uploading Full-Length Paper:
Authors who are allowed to upload their full-length paper(s) should use the same account details to upload their full paper(s).
First Acceptance:
The final paper will proceed to the primary revision to be checked if it meets the conference proceedings standards. Once it gets accepted, the author will be informed to pay the fees so that it could be sent for the final revision by the scientific committee.
Payment:
In this step, and to proceed paper(s) that passed to final revision process and to get the final approval, authors have to pay the requested fees. Otherwise, the final revision process will not be considered for their papers.
Inspections and Final Approval of Full Papers:
The full papers that paid the requested fees will get finally inspected, either scientifically or linguistically. There will be a rigorous review process of full papers following the previous process according to the following criteria:
(1) Is the topic relevant to the conference?
(2) Are the writing and structure clear?
(3) Are graphics, photos, illustrations used where needed?
(4) Are the aims of the study clearly stated?
(5) Are the objectives of the study achieved?
(6) Is the literature review relevant and adequate?
(7) Has the author used the appropriate methodology and explained them clearly?
(8) Has the author interpreted the findings correctly?
(9) Is the paper a significant contribution to the field?
These are the registration and revision procedures for publication that all authors should follow.
- IEREK has an unyielding policy regarding plagiarism. We believe that copying/taking the ideas and work of other Authors without permission and credit is fraudulent.
- The Reviewing committee and IEREK employees have the authority to reject a paper during its reviewing process, on the basis of the paper being subjected to either minor or major plagiarism.
- Duplicating any content, even if it is one sentence or one table without the consent of its original Author, will lead to the paper’s refusal upon the complaint of the plagiarism victim.
- Publication in IEREK Press:- Authors will be given the chances to publish in 'ARChive'. - Selected Manuscripts:- A book Series by 'Springer'. Publication in the 'Springer' Book Series will only be applicable to the selected papers that will be supervised by highly professional members of an International Editorial Board to ensure a high-quality publication material - To publish your research in an online Journal or Book by 'Springer' and provide it with world-wide visibility, authors must submit an extended version of their short papers that are 10 -12 pages long. * Full length papers selected for publication in ASTI book series are subject to submission into a rigorous revision process by a scientific committee of experts before notice of acceptance/rejection for publication. * Thus, such outstanding material will lead to the indexing of the series in well-known indexing databases such as 'Scopus' and 'Thomson Reuters'. |
- IEREK provides you the English Review service; where we will be responsible for the language review process of your paper. This service will get your paper revised in terms of grammar, punctuation, and language structure; without changing the scientific content.
- This service will ensure you have the perfect language structure, to get your perfect paper published. This will help you increase the number of citations and make it easier for others access the information provided in your paper.
Fees for the editing process:
Paper Pages | Papers 4-5 pages long | Papers 8-12 pages long |
Editing fees | 80$ | 150$ |
If you are interested in getting this service, please email us your paper on: editing@ierek.com
Sustainable Urban and Community development Institute
To participate from China,
please contact IEREK's
chinese representative:
Rachel Meng
Tel: +86 (0) 1059105326
Email: chinaconf.event@gmail.com
Join IEREK community